1. Home
  2. Coax Cable
  3. Do standard PL-259’s fit JEFA Tech coax?

Do standard PL-259’s fit JEFA Tech coax?

STANDARD TRADITIONAL PL-259 CONNECTORS:
CPL259

The procedure for installing standard PL-259’s on the LL400 (standard or flex) cable is the same as RG8. No special adapters or tools are required other than a soldering iron.

For LL195 or RG-58 type cable, you will need this reducer for a proper fit:
http://www.jefatech.com/product/CPL259-58-REDUCER

For LL240FLEX or RG-8X type cable you will need this reducer for a proper fit:
http://www.jefatech.com/product/CPL259-8X-REDUCER

SOLDER / CRIMP “HYBRID” PL-259 CONNECTORS:
C400UHF

The UHF Male crimp type PL-259’s, also known as a hybrid connector, are also soldered on the center pin, but require a hex crimper for the outer ferrule:
http://www.jefatech.com/product/HT-336D2

UHF Male for LL400, LL400FLEX, RG-8, RG-213:
http://www.jefatech.com/product/C400UHF

UHF Male for LL240FLEX, RG-8X:
http://www.jefatech.com/product/C240UHF

UHF Male for LL195, RG-58
http://www.jefatech.com/product/C195UHF

Was this article helpful?

Related Articles