I want to use a wireless network to one of my buildings on my property. it is about 300 ft to the out building. What do I need?
Here is what you will need:
http://www.jefatech.com/product/EL-2611CB3DELUXE This is a wireless to Ethernet bridge. You plug it into your PC's Ethernet card or network switch (if you have a network) and it converts the Ethernet connection to wireless.
http://www.jefatech.com/product/ll400 You will need a jumper cable with the length you need to go from your bridge to the antenna outside. You need an N Male connector on one side, and an N Female on the other. A different option, if the bridge will be within 6 feet of the antenna, you can use a 6 foot version of the pigtail above: http://www.jefatech.com/product/195RPTNCNM72
Search the Knowledgebase
Browse by Category
Print this page
Email this page
Post a comment
Subscribe me
Remove from favorites